Drywall Systems & Plastering in Burgas.

Drywall is the fastest way to change what a space is — to divide a large room, hide services above a suspended ceiling, build niches for lighting or simply turn rough walls into perfectly flat surfaces. InterniPro builds drywall systems in Burgas for apartments, houses, offices and commercial units: partition walls, suspended and multi-level ceilings, arches, niches and decorative structures with integrated lighting, all finished with fine plastering to a genuinely paint-ready standard.

Every job follows the same disciplined sequence. We set out the geometry with laser levels, fix galvanised CD and UD profiles to a rigid, squeak-free frame, run any cables or pipework inside the cavity, fit insulation where the design calls for it, and board with the correct panel for the room. Joints are taped and filled in stages, then the whole surface receives a fine skim coat, sanding and priming.

The phrase paint-ready means something specific to us: a surface that needs no further filling, shows no joints or screw heads under raking light, and takes paint evenly across its whole area. That standard is checked before we hand over — because the painter, whether ours or yours, should start painting, not repairing.

We build with certified Knauf and Rigips systems — boards, profiles, compounds and accessories engineered to work together — rather than mixing whatever is cheapest that week. System integrity is what the manufacturers' performance figures depend on, and it is also what keeps a ceiling flat ten years after installation.

Board selection is matched to the room: standard panels for dry living spaces, moisture-resistant green board for bathrooms and kitchens — essential in the humid coastal climate — and fire-resistant board where regulations or common sense require it. Inside partitions we install mineral wool for acoustic and thermal insulation, which is the difference between a wall that merely divides and one that gives you a quiet bedroom. Typical work includes:

• Partition walls with acoustic insulation
• Suspended ceilings that conceal wiring and ducting
• Multi-level ceilings with integrated LED lighting
• Arches, niches and decorative features
• Moisture-resistant systems for bathrooms
• Fire-resistant walls and enclosures
• Full plaster and fine skim coats
• Sanding and priming to a paint-ready surface

The main cost drivers are area and complexity. A straight partition wall is priced very differently from a curved multi-level ceiling with lighting coves, because the second involves far more setting out, cutting and finishing labour. Board type adds its own increment — moisture-resistant and fire-resistant panels cost more than standard board — as does insulation thickness and density inside the cavity.

Ceiling height and access influence labour time, and so does what the structure must carry: TV mounts, heavy shelving or sanitary fixtures need reinforcement built into the frame at the right positions. For plastering-only work the variable is the condition of the existing surface — walls with deep deviations need thicker build-ups and more coats than walls that only require a fine skim. Every factor is visible as a line in our written quote, prepared after a free site visit and fixed before work begins.

Sea-air humidity is the defining condition for interior finishing in Burgas. In bathrooms, kitchens and any space that stands closed through the winter — a common situation in holiday apartments in Sunny Beach, Sveti Vlas and Nessebar — we specify moisture-resistant board as standard, because ordinary panels in a damp coastal bathroom are a known failure waiting to happen.

In the panel-built quarters of Meden Rudnik, Slaveykov, Izgrev and Zornitsa, drywall solves the classic panel-building problems: walls that are out of plumb, poor sound separation between rooms and cold external walls. A lined and insulated wall corrects geometry, acoustics and thermal comfort in one operation. In brick buildings around Lazur, Vazrazhdane and Bratya Miladinovi, suspended ceilings tidy away decades of surface-run cables without chasing.

New builds are the other half of our workload. Apartments handed over at BDS completion stage in Sarafovo and across Burgas get their interior architecture from us — partitions, ceilings, niches — built to the same Bulgarian BDS standards as the base building, then plastered and primed ready for the decorating stage.

Drywall and plastering are stages most owners never see in person — they happen in the middle of a renovation, between strip-out and decoration. For our remote clients we make them fully visible anyway: photo reports show the frame with its insulation before boarding, services inside cavities before they are closed, and the finished surfaces under raking light after sanding. You know exactly what is inside your walls and ceilings, with a photographic record you keep.

Everything commercial is agreed in writing in English before work starts: scope, board types, insulation, number of finishing coats and a fixed price with a fixed deadline. Questions during the works are answered by email or WhatsApp within the working day.

At handover we inspect the surfaces together — in person or by video call — against the agreed specification, complete any touch-ups, and sign the handover protocol that starts your 6-month workmanship warranty. If our painting team takes over next, the transition is seamless; if your own decorator follows, they inherit surfaces that are genuinely ready. The site visit and written quote are free — call +359 897 33 81 47.